dda(xxxx)u document number: ds30346 rev. 11 - 2 1 of 7 www.diodes.com november 2013 ? diodes incorporated dda ( xxxx ) u pnp pre-biased small signal d ual surface mount transistor features ? epitaxial planar die construction ? complementary npn types available (ddc) ? built-in biasing resistors ? totally lead-free & fully rohs compliant (notes 1 & 2) ? halogen and antimony free "green" device (note 3) ? qualified to aec-q101 standards for high reliability ? ppap capable (note 4) part number r1 (nom) r2 (nom) dda124eu 22k ? 22k ? dda144eu 47k ? 47k ? dda114yu 10k ? 47k ? dda123ju 2.2k ? 47k ? dda114eu 10k ? 10k ? mechanical data ? case: sot363 ? case material: molded plasti c, ?green? molding compound ? ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: finish ? matte tin plated leads, solderable per mil-std-202, method 208 ? weight: 0.006 grams (approximate) part number r1 only dda113tu 1k ? dda143tu 4.7k ? dda114tu 10k ? ordering information (notes 4 & 5) product compliance marking reel size (inches) tape width (mm) quantity per reel dda124eu-7-f aec-q101 p17 7 8 3,000 dda124euq-7-f automotive p17 7 8 3,000 dda124euq-13-f automotive p17 13 8 10,000 dda144eu-7-f aec-q101 p20 7 8 3,000 dda144euq-7-f automotive p20 7 8 3,000 dda114yu-7-f aec-q101 p14 7 8 3,000 dda114yuq-7-f automotive p14 7 8 3,000 dda123ju-7-f aec-q101 p06 7 8 3,000 DDA114EU-7-F aec-q101 p13 7 8 3,000 dda114euq-7-f automotive p13 7 8 3,000 dda113tu-7-f aec-q101 p01 7 8 3,000 dda143tu-7-f aec-q101 p07 7 8 3,000 dda143tuq-7-f automotive p07 7 8 3,000 dda143tuq-13-f automotive p07 13 8 10,000 dda114tu-7-f aec-q101 p12 7 8 3,000 dda114tuq-7-f automotive p12 7 8 3,000 dda114tuq-13-f automotive p12 13 8 10,000 notes: 1. no purposely added lead. fully eu directiv e 2002/95/ec (rohs) & 2011/6 5/eu (rohs 2) compliant. 2. see http://www.diodes.com/quality/lead_free.html for more in formation about diodes incorporated?s definitions of halogen- a nd antimony-free, "green" and lead-free. 3. halogen- and antimony-free "green? products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total br + cl) and <1000ppm antimony compounds. 4. automotive products are aec-q101 qualified and are ppap c apable. automotive, aec-q101 and standard products are electrical ly and thermally the same, except where specified. for more information, please refer to http://www.diodes.c om/quality/product_compliance_defin itions/. 5. for packaging details, go to our websit e at http://www.diodes.com /products/packages.html. r1 , r2 r1 only r 1 r 1 r 2 654 123 r 2 r 1 6 5 4 3 2 1 r 1 to p view sot363 device schematic
dda(xxxx)u document number: ds30346 rev. 11 - 2 2 of 7 www.diodes.com november 2013 ? diodes incorporated dda ( xxxx ) u marking information date code key year 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 code r s t u v w x y z a b c d e month jan feb mar apr may jun jul aug sep oct nov dec code 1 2 3 4 5 6 7 8 9 o n d absolute maximum ratings (@t a = +25c, unless otherwise specified.) characteristic symbol value unit supply voltage (1) to (6) and (4) to (3) v cc -50 v input voltage (1) to (2) and (4) to (5) dda124eu dda144eu dda114yu dda123ju dda114eu dda113tu dda143tu dda114tu v in +10 to -40 +10 to -40 +6 to -40 +5 to -12 +10 to -40 +5v max +5v max +5v max v output current dda124eu dda144eu dda114yu dda123ju dda114eu dda113tu dda143tu dda114tu i o -30 -30 -70 -100 -50 -100 -100 -100 ma output current i c ( max ) -100 ma thermal characteristics (@t a = +25c, unless otherwise specified.) characteristic symbol value unit power dissipation (notes 6 & 7) p d 200 mw thermal resistance, junction to ambient air (note 6) r ja 625 c/w operating and storage temperature range t j , t stg -55 to +150 c notes: 6. mounted on fr4 pc board with minimum recommended pad layout. 7. 150mw per element must not be exceeded. pxx = product type marking code (see ordering information) ym = date code marking y = year (ex: t = 2006) m = month (ex: 9 = september) pxx ym pxx ym
dda(xxxx)u document number: ds30346 rev. 11 - 2 3 of 7 www.diodes.com november 2013 ? diodes incorporated dda ( xxxx ) u electrical characteristics (@t a = +25c, unless otherwise specified.) characteristic (dda113tu & dda143tu & dda114tu only) symbol min typ max unit test condition collector-base breakdown voltage bv cbo -50 ? ? v i c = -50 a collector-emitter breakdown voltage bv ceo -50 ? ? v i c = -1ma emitter-base breakdown voltage bv ebo -5 ? ? v i e = -50 a collector cutoff current i cbo ? ? -0.5 a v cb = -50v emitter cutoff current i ebo ? ? -0.5 a v eb = -4v collector-emitter saturation voltage v ce(sat) ? ? -0.3 v i c /i b = -2.5ma / -0.25ma dda143tu i c /i b = -1ma / -0.1ma dda114tu i c /i b = -10ma / -1ma dda113tu dc current transfer ratio h fe 100 160 250 ? 600 ? ?? i c = -1ma, v ce = -5v i c = -1ma, v ce = -5v dda143tuq input resistor (r 1 ) tolerance ? r 1 -30 ? +30 % ? gain-bandwidth product (note 7) f t ? 250 ? mhz v ce = -10v, i e = 5ma, f = 100mhz characteristic symbol min typ max unit test condition input voltage dda124eu dda144eu dda114yu dda123ju dda114eu v l(off) -0.5 -0.5 -0.3 -0.5 -0.5 -1.1 -1.1 ?? ?? -1.1 ? v v cc = -5v, i o = -100a dda124eu dda144eu dda114yu dda123ju dda114eu v l(on) ? -1.9 -1.9 ?? ?? ? 1.9 -3.0 -3.0 -1.4 -1.1 -3.0 v o = -0.3, i o = -5ma v o = -0.3, i o = -2ma v o = -0.3, i o = -1ma v o = -0.3, i o = -5ma v o = -0.3, i o = -10ma output voltage dda124eu dda144eu dda114yu dda123ju dda114eu v o(on) ? -0.1 -0.3 v i o /i l = -10ma / -0.5ma i o /i l = -10ma / -0.5ma i o /i l = -5ma / -0.25ma i o /i l = -5ma / -0.25ma i o /i l = -10ma / -0.5ma input current dda124eu dda144eu dda114yu dda123ju dda114eu i l ? ? -0.36 -0.18 -0.88 -3.6 -0.88 ma v i = -5v output current i o ( off ) ? ? -0.5 a v cc = -50v, v i = -0v dc current gain dda124eu dda124euq dda144eu dda114yu dda123ju dda114eu g l 56 60 68 68 80 30 ? ? ? v o = -5v, i o = -5ma v o = -5v, i o = -5ma v o = -5v, i o = -5ma v o = -5v, i o = -10ma v o = -5v, i o = -10ma v o = -5v, i o = -5ma input resistor (r 1 ) tolerance ? r 1 -30 ? +30 % ? resistance ratio tolerance r 2 /r 1 -20 ? +20 % ? gain-bandwidth product f t ? 250 ? mhz v ce = -10v, i e = -5ma, f = 100mhz note: 7. transistor - for reference only
dda(xxxx)u document number: ds30346 rev. 11 - 2 4 of 7 www.diodes.com november 2013 ? diodes incorporated dda ( xxxx ) u typical curves ? dda123ju (@t a = +25c, unless otherwise specified.) -50 050100150 250 200 150 50 100 0 t , ambient temperature ( c) fig. 1 power dissipation vs. ambient temperature a p , p o we r dissi p a t i o n (mw) d 10 1,000 100 110100 h, d c c u r r e n t g ai n fe i , collector current (ma) fig. 2 typical dc current gain vs. collector current c v = 10v ce 75 c 0.001 0.01 0.1 1 010 20 30 40 50 v, c o lle c t o r emi t t e r saturation voltage (v) ce(sat) i , collector current (ma) fig. 3 typical collector emitter saturation voltage vs. collector current c i/i = 10 cb -25 c 75 c 25 c 0 2 4 6 12 0 20 30 c a p a c i t an c e (p f ) v , reverse voltage (v) fig. 4 typical capacitance characteristics r 10 5 15 25 8 10 f = 1mhz c obo 0.001 0.01 1 10 100 0234 8910 i, c o lle c t o r c u r r e n t (ma) c v , input voltage (v) fig. 5 collector current vs. input voltage in -25c 567 25c 0.1 v = 5v o 75c 1 0.1 1 10 01020304050 i , collector current (ma) fig. 6 input voltage vs. collector current c v , input voltage (v) in
dda(xxxx)u document number: ds30346 rev. 11 - 2 5 of 7 www.diodes.com november 2013 ? diodes incorporated dda ( xxxx ) u typical curves ? dda114tu (@t a = +25c, unless otherwise specified.) -50 050100150 250 200 150 50 100 0 t , ambient temperature ( c) fig. 1 power dissipation vs. ambient temperature a p , p o we r dissi p a t i o n (mw) d 10 1,000 100 1 110100 h, d c c u r r e n t g ai n fe i , collector current (ma) fig. 2 typical dc current gain vs. collector current c 0.001 0.01 0.1 1 0 10 20 30 40 50 v, c o lle c t o r emi t t e r saturation voltage (v) ce(sat) i , collector current (ma) fig. 3 typical collector emitter saturation voltage vs. collector current c i/i = 10 cb -25 c 25 c 75 c 0 6 12 0 20 30 c a p a c i t a n c e (p f ) v , reverse voltage (v) fig. 4 typical capacitance characteristics r 10 515 25 10 8 4 2 f = 1mhz c obo 0.01 0.1 1 10 100 01 2 34 89 10 i, c o lle c t o r c u r r en t (ma) c v , input voltage (v) fig. 5 collector current vs. input voltage in 5 67 25c 0.001 0.1 1 10 01020304050 i , collector current (ma) fig. 6 input voltage vs. collector current c v = 0.2v o v , input voltage (v) in -25c
dda(xxxx)u document number: ds30346 rev. 11 - 2 6 of 7 www.diodes.com november 2013 ? diodes incorporated dda ( xxxx ) u package outline dimensions please see ap02002 at http://www.diodes.com /datasheets/ap02002.pdf for latest version. suggested pad layout please see ap02001 at http://www.diodes.com/dat asheets/ap02001.pdf for the latest version. sot363 dim min max typ a 0.10 0.30 0.25 b 1.15 1.35 1.30 c 2.00 2.20 2.10 d 0.65 typ f 0.40 0.45 0.425 h 1.80 2.20 2.15 j 0 0.10 0.05 k 0.90 1.00 1.00 l 0.25 0.40 0.30 m 0.10 0.22 0.11 ?? 0 8 - all dimensions in mm dimensions value (in mm) z 2.5 g 1.3 x 0.42 y 0.6 c1 1.9 c2 0.65 x z y c1 c2 c2 g a m j l d b c h k f
dda(xxxx)u document number: ds30346 rev. 11 - 2 7 of 7 www.diodes.com november 2013 ? diodes incorporated dda ( xxxx ) u important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability ari sing out of the application or use of this document or an y product described herein; neither does di odes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or us er of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated a nd all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability w hatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of t his document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical component s in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2013, diodes incorporated www.diodes.com
|
